Everpure EV932401 Insurice® Water Filtration System Insurice® Single-i2000²

Add filtration, scale inhibition, and easier maintenance in one compact system.

The Everpure EV932401 Insurice® Single-i2000² combines particulate filtration, chlorine taste and odor reduction, and scale inhibition in a single-cartridge system for ice-machine water. Ordering the matched system through IceMachinesPlus reduces initial setup guesswork, with eligible purchases covered by our 30-Day Price Match Guarantee.

The EV932401 is a complete water-filter unit, not a loose replacement cartridge. It includes one i2000² Micro-Pure® II precoat filtration cartridge, an outlet pressure gauge for monitoring performance, and a flushing valve for maintenance.

Before ordering, confirm the system’s service flow, plumbing connections, installation space, and access for future cartridge changes. Our commercial ice maker installation checklist can help coordinate the filtration system with the ice machine’s water, drain, electrical, and clearance requirements.

Review these details before approving the EV932401 for the installation.

The i2000² cartridge uses precoat filtration to reduce particulate matter at the listed 0.5-micron rating. It also reduces chlorine-related taste and odor, which can affect the taste and clarity of finished ice.

Scale inhibition adds another layer of equipment support. The EV932401 is designed to help limit scale buildup that can affect water lines and ice-machine components. It doesn’t soften the water or remove all dissolved minerals, so local water conditions still determine cleaning and descaling needs.

The outlet pressure gauge gives operators a visible way to monitor system performance. A continuing reduction in downstream pressure or flow may indicate a loaded cartridge, a restricted water supply, or another installation issue. Check the water supply and system condition before assuming the ice machine itself needs service.

For installation:

• Confirm that the available flow falls within the listed 0.1–2.0 GPM range.
• Match the plumbing to the system’s 3/8-inch inlet and outlet connections.
• Mount the system where its full operating weight can be supported securely.
• Keep the pressure gauge and flushing valve visible and accessible.
• Preserve enough clearance to remove and install the cartridge without dismantling nearby equipment.
• Protect the system and water lines from freezing.
• Check every connection for leaks before returning the ice machine to service.

The EV932401 has a rated capacity of up to 9,000 gallons, but capacity isn’t a guaranteed service interval. Incoming-water quality, sediment load, scale conditions, and daily consumption can require earlier replacement.

Use the EV9612-22 i2000² cartridge when the installed cartridge reaches capacity, when water flow becomes too slow, or as required by the maintenance schedule. A six-month preventive replacement program is recommended for this system. Our guide explains when to replace an ice machine water filter.

To replace the cartridge, shut off the water and relieve system pressure. Turn the old cartridge to the left, pull it down, insert the new cartridge into the head, and turn it to the right until it locks. Restore the water supply, inspect the system for leaks, and flush the new cartridge to drain for the time stated in the cartridge instructions. Pentair’s Everpure cartridge-change instructions provide the general quarter-turn procedure.

Don’t clean and reinstall a loaded i2000² cartridge. Replace it and use the flushing valve to prepare the new cartridge for service. Operating the system without a cartridge bypasses the filtration and scale-inhibition functions.

The EV932401 is a practical fit when one matched system can meet the ice machine’s flow demand and available installation space. If the required flow, capacity, or configuration differs, compare other commercial ice-machine water filtration systems before ordering.

A few details about the EV932401 are important before installation.

Is the EV932401 a complete system or only a replacement cartridge?

The EV932401 is a complete single-cartridge filtration system. It includes one i2000² cartridge, an outlet pressure gauge, and a flushing valve. Replacement cartridges are ordered separately after the included cartridge reaches its service limit.

What does the EV932401 reduce?

The EV932401 provides 0.5-micron particulate filtration, reduces chlorine-related taste and odor, and inhibits scale buildup. It doesn’t soften water, remove every dissolved mineral, or replace required ice-machine cleaning and descaling.

Which replacement cartridge fits the EV932401?

Use the Everpure EV9612-22 i2000² replacement cartridge. Confirm the complete model number before ordering because similarly named Everpure cartridges may have different treatment media, capacities, and system applications.

How often should the i2000² cartridge be replaced?

Replace it on a six-month preventive-maintenance schedule, when its 9,000-gallon capacity is reached, or when water flow becomes too slow. High sediment levels and demanding use may shorten the service interval.

How do you replace and flush the Everpure cartridge?

Shut off the water, relieve pressure, turn the old cartridge left, and pull it down. Insert the new cartridge, turn it right until locked, restore the water, check for leaks, and flush the cartridge to drain according to its current instructions.